Injecto motriz the Fuel Injection Specialists, Offers the fuel injector service to your Vehicle.
Remove the Fuel Injectors from your Vehicle Wrap it and send to our fuel injector service center at AV PLUS, 7428 SW 42nd ST Miami Florida 33155.
DOWNLOAD NOW, and attach with your injectors before to send us:
INJECTOR SERVICE ORDER FORM
NOW YOU CAN KEEP THE INJECTORS AS NEW INSTEAD OF REPLACING THEM
- NEW Injector from 100$ to 250$ each
- Fuel Injector Service from 20$ + TAX
(depend the fuel injector type)
A BRIEF DESCRIPTION FOR PROPER INJECTOR SERVICING
Upon their removal from the vehicle, the injectors must be placed on a flow bench for their testing. Then, their parts, such as: pintles, seals, and filter baskets, are disassembled, using the tools designed for such purpose. Subsequently, the following tests are performed:
Leak Test: It consists of checking for any leaks through the pintle, or . the injector’s body. On the flow bench, the variable pressure regulator allows to adjust the system’s
pressure to the vehicle’s own.
Spray Pattern Test: As its name suggests, it consists in examining the fuel’s spray pattern. The flow bench’s control panel has options which can simulate the injectors’ performance as if they were fitted to the vehicle, thus allowing for a more accurate testing.
Flow Test: It consists in measuring the fuel flow delivered by the injectors to the engine, allowing to check eventual flow mismatches. The simultaneous testing of various injectors may be performed on a good flow bench, thus allowing for more precise comparisons.
Electronic operation: It consists in testing the injectors’ performance under different operational or functioning conditions.
The results of such testing shall determine whether the injectors should undergo the ultrasonic cleaning process.
The ultrasonic cleaning process destroys in just 10 minutes all the crystallized particles and contaminants located inside the injector, which block the adequate fuel flow through them, thus restoring their normal function.
After the injectors’ ultrasonic cleaning, they must undergo once more all the previous tests, and once they are correctly adjusted and calibrated, they must be reassembled with a set of parts, or KIT, in order to be ready to be installed in the vehicle.